Buick Grand National Parts – Regal – T-Type Bumper Filler Sets

« Back

Product Name

1981-1987 Buick Grand National, Regal, T-Type, GN, GNX

HIGHEST QUALITY FIBERGLASS! These are reproductions of the Original parts. All parts come in a black gel-coat finish and must be sanded, primed and painted. These Fillers will fit 1984, 1985, 1986 and 1987. If your car is a 1981, 1982 or 1983, The rears are the same, but the tip of the front fillers must be cut off since that year range already has the tip moulded into the nose.

See GallerySEE GALLERY See GalleryGNF Regal Bumper Filler Instructions

Product Name

1981-87 Buick Grand National, Regal Bumper Filler Front Set

These fiberglass bumper are a perfect fit and will last the lifetime of your car. For 1981-83, slight modification if required.

See GallerySEE GALLERY See GalleryGNF Regal Bumper Filler Instructions

Product Name

1981-87 Buick Grand National, Regal Bumper Filler Rear Set

These very nice reproductions fit great and will last the lifetime of your car!

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Product Name

1981-87 Buick Grand National, Regal Fiberglass Front Bumper

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Product Name

1981-87 Buick Grand National, Regal Fiberglass Rear Bumper

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Product Name

1984-1987 Buick Grand National / T-Type/ Regal Header Panel

1984-1987 BUICK GRAND NATIONAL / T-TYPE/ REGAL HEADER PANEL – This is a fiberglass reproduction of the original. It is a very good fit and looks like the OEM GN unit when installed, therefore is it perfect for racing (only 6.5 lbs!). All of the Factory Mounting locations to the car are used. These are the internal differences you will find in our header panel compared to the OEM Injection Moulded Unit: 1) The under-hood metal bracket (directly behind the radiator) is moulded in fiberglass as part of header panel. 2) Your OEM grille is installed using our provided custom aluminum hardware , which is screwed into the back of the moulded (under hood) bracket (screws provided). 3) The Radiator support mounting studs (included) bolt-in to the header panel instead of being moulded in like the OEM. 4) The headlight mounding holes are marked but will be need to be drilled out before installing the headlight hardware. 5) There are no studs in the back side of the ends (where they header panel bolts into the fenders). Instead, We provide bolts, nuts and washers, which are completely hidden by the headlight Bezel. 6) This header panel in like the GN version which does not have the hole in the center for the Regal hood ornament, which makes it a much cleaner look perfect for the Grand National. If you prefer using the hood ornament you can drill a mounting hole and install it.

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Product Name

1981-87 Buick Grand National, Regal Rear 3-Piece Spoiler

See GallerySEE GALLERY See GalleryGN Spoiler Installation Instructions

Product Name

1981-87 Buick Grand National, Regal GNX Wheel Flares

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Product Name

1981-87 Buick Grand National, Regal GNX Louvers-16-1/2″ X 3″

1981-87 Buick Grand National, Regal, GNX Louvers

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Product Name

Turbo GN and T-Type Fiberglass hood Scoop



See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Comments are closed.